PEEK

VICTREX™ PEEK, or polyetheretherketone, is a semi-crystalline thermoplastic, often used in place of machined metals in a wide variety of critical end-use applications. PEEK is a superior performance thermoplastic material with excellent mechanical, thermal, and chemical resistance properties. PEEK’s properties make it an excellent choice as a mechanical backup for softer seals. Not only can PEEK withstand high temperatures, but it can do so in extreme chemical service. These features have made it the material of choice for some applications in the oil and gas sector. Let us be your PEEK supplier!

PERFORMANCE CHARACTERISTICS

Flexural Modulus 4.10GPa (ASTM D970)

Flexural Strength 156.07MPa (ASTM D970)

Impact Strength (Notched Izod) 96.52J/m (ASTM D256)

Tensile Elongation at Break 64.97% (ASTM D638)

Tensile Elongation at Yield 4.84% (ASTM D638)

Tensile Strength at Yield 101.94MPa (ASTM D638)

Tensile Strength at Break 96.30MPa (ASTM D638)

Tensile Young’s Modulus 3.96GPa (ASTM D638)

Black Speck (Average) Granule 0.0 Count/100g (TM-VX-11A)

Black Speck (Sized Film) 0.0mm2 (TM-VX-17)

Color B (TM-VX-19)

Extraneous Contamination PASS (TM-VX-11C)

Granule Cut PASS (TM-VX-11D)

Flexural Modulus 3.78GPa (ISO 178)

Flexural Strength 164.87MPa (ISO 178)

Impact Strength (Notched Izod) 7.35kJ/m2 (ISO 178)

Tensile Elongation (at Break) 47.92% (ISO 527)

Tensile Strength (at Yield) 99.03MPa (ISO 527)

Melt Stability 4.02% TM-VX-12C

Moisture Content (Granule) .10% TM-VX-38

Melt Viscosity .463kNs/m2 (TM-VX-12A)

Shore D Hardness 84.40Pts (ASTM D2240)

Specific Gravity 1.292g/cm3 (ASTM D792 / ISO 1183)